4G GSM-POWER Remote Control Power Strip - AC (110-240V) Powered

Product Manual

This is a wireless GSM remote control power strip/bar that connects to a 3G/4G GSM cell phone network.

This device has two mains sockets that can be activated/controlled by calling the phone number of the SIM card that you insert into the device, or by SMS text message. When the device receives a call, it will trigger the first socket and hang up immediately. This means that you will never pay any money for calling the device since it never answers the phone; it will simply hang up.

The first socket has two modes. The first mode is a timer mode. If the first socket is in timer mode when the device is called, it will supply power to whatever device is plugged into it for a set amount of time. This amount of time is programmed in by the user and can be programmed in as milliseconds, seconds, or minutes.

The second mode is relay mode. If the socket is in relay mode when it is called, it will change state from whatever state it was in last. So if the socket was active and supplying power to a device when the call comes in, the socket will deactivate and the device plugged into it will turn off.

All of these settings can be programmed either through your PC or by SMS text messages to the device.

The device also has a white list of numbers that are allowed to call the device, and uses a password to protect it when it receives SMS text messages.

You can use this device to control any device that runs off of AC mains. Servers, routers, appliances, lights, pre-heaters, electronics, etc.

Specifications

• Working voltage is 110-240V AC @ 1 amp (1 amp is recommended, but 500 mA is suitable)
• Real-time & interactive control
• Working bands for USA:
  • UMTS: B2/B4/B5
  • GSM: 850/1900MHz
  • FDD LTE: B2/B4/B5/B12/B17
• Working bands for Europe:
  • UMTS:B1/B5/B8
  • GSM:850/900/1800/1900MHz
  • FDD LTE:B1/B3/B5/B7/B8/B20
• 2 relays - Each relay can handle up to 250V @ 10A
• Operating temperature: -25 °C to +60 °C, -12 °F to 140 °F
• Small standby power consumption
• Relay's remember last state in the event of power loss.
• Optional password protection to prevent unauthorized access to the device.
• Total control from anywhere in the world! You can program the device using SMS text messages. If it needs updating, you don't need to be physically there!
• Two operating modes (momentary and latching relays)
• One relay is relay is activated by telephone call, the rest are activated by SMS
• Fine grained timer control (programmed by milliseconds, seconds, minutes)
• Comes with USB connector that allows the user to connect the device to their computer via a USB cable to program it.